自己レスで恐縮です。 > 昨日停電があり、本日システムを起動し直したところ、クライ > アントがDHCPでアドレスを取得できないためシステムを起動でき > ない模様でした。自分が調べたところどうやらハブが壊れてしま > ったようで、これを予備のものに取り替えたところ、アドレスの > 取得には問題がなくなった模様です。 > しかしクライアントはその後も正常に動作せず、画面に以下の > メッセージを出したところでストップします。 思い立って二枚目と三枚目のNICを入れ替えてみたら、いまの ところ異常なくクラスタは動いております(並列計算には三枚目 のNICを使用)。ハブをもとのものに戻しても動作しています。 ハブを入れ替えることで症状が変わったので、てっきりNICには 問題がないもと思いこんでいました。 いまでもまだ、ハブによって症状が異なる事情が飲み込めません けれど、とりあえずご報告まで。 なにかお気づきの点がありましたらひきつづきアドバイスを お願いします。 > > ... > hid-core.c: USB HID support drivers > mice: PS/2 mouse device common for all mice > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP routing cache hash table of 512 buckets, 4kbytes > TCP: Hash table configured (established 4096 bind 8192) > Linux IP multicast router 0.06 plus PIM-SM > Sending DHCP requests., OK > IP-Config: Got DHCP answer from 192.168.31.254, my adress is 192.168.31.41 > IP Config: Complete: > device=eth0, addr=192.168.31.41, mask = 255.255.255.0, > gw=192.168.31.254, host=192.168.31.41, domain=, nis-domain=(none), > bootserver=192.168.31.254, rootserver=192.168.31.254, rootpath=/nfsroot > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > adb: starting probe task... > Looking up port of RPC 100003/2 on 192.168.31.254 > Looking up port of RPC 100005/1 on 192.168.31.254 > UFS: Mounted root (nfs filesystem) > Freeing unused kernel memory: 196k initi 8k chrp 36k prep > ADB keyboard at 2, handler set to 3 > Detected ADB keyboard, type ANSI > input1: ADB HID on IP 2:2.02 > adb: finished probe task... > nfs: server 192.168.31.254 not responding, still trying > > 念のため/nfsroot以下をバックアップしておいたものと入れ替えて > みましたが、状況に変わりありません。 -- 田中 元 BYH01337@xxxxxxxxxxx
References:
- Prev by Subject: [linux-users:104140] Re: vncサーバをxinetd経由で起動させるには?
- Next by Subject: [linux-users:104142] Re: FC3のXサーバにつながらない。
- Previous by thread: [linux-users:104139] nfs: server not responding
- Next by thread: [linux-users:104144] 「文字列Aを含み、且つ文字列Bを含まない」正規表現の記述
- Indexes:[Main][Thread]