[linux-users:95095] $B#3KgL\$N#N#I#C$NG'<1(B

[Nobuyoshi Nagashima <nagasi _at_ xxxxxxxxxxxxxxxxx>]

$BD9Eh$H?=$7$^$9!#(B
$B$$$D$b$*@$OC$K$J$C$F$$$^$9!#(B

Linux$B%^%7%s!J(BVersapro VA60J)$B$K#3Kg$N(BNIC
$B!J#1$D$OFbB"!";D$j#2$D$O(BPCMCIA$B$N%+!<%I!K$rA^$7$F%U%!%$%"%&%)!<%k$r(B
$B9=C[$7$?$$$N$G$9$,!"#3KgCf;D$j#1Kg!J2Aw!"(BNIC$B$NG'<1$O@.8y$7!"IaDL$K$d$jo$KD9$/$F?=$7Lu$"$j$^$;$s$,!"%m%0$rE:IU$7$^$9!#(B

$B$4B8CN$NJ}$,$$$i$C$7$c$$$^$7$?$i$h$m$7$/$465JN,(B
Sep  4 04:38:51 va60j sysctl: net.ipv4.ip_forward = 1 
Sep  3 19:39:20 va60j kernel: IA-32 Microcode Update Driver: v1.09 <tigran _at_ veritas.com>
Sep  4 04:38:51 va60j sysctl: net.ipv4.conf.default.rp_filter = 1 
Sep  3 19:39:19 va60j pcmcia: Starting PCMCIA services:
Sep  3 19:39:20 va60j kernel: Starting kswapd
Sep  4 04:38:51 va60j sysctl: net.ipv4.tcp_ecn = 0 
Sep  3 19:39:20 va60j kernel: kinoded started
Sep  3 19:39:21 va60j pcmcia:  modules

$B>JN,(B
Sep  3 19:39:10 va60j network: Setting network parameters:  succeeded 
Sep  3 19:39:22 va60j pcmcia:  cardmgr.
Sep  3 19:39:22 va60j kernel: Linux IP multicast router 0.06 plus PIM-SM
Sep  3 19:39:11 va60j network: Bringing up interface lo:  succeeded 
Sep  3 19:39:22 va60j cardmgr[970]: starting, version is 3.1.22
Sep  3 19:39:22 va60j kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Sep  3 19:39:16 va60j network: Bringing up interface eth0:  succeeded 
Sep  3 19:39:22 va60j rc: Starting pcmcia:  succeeded
Sep  3 19:39:22 va60j kernel: RAMDISK: Compressed image found at block 0
Sep  3 19:39:17 va60j network: Bringing up interface wvlan0:  succeeded 
Sep  3 19:39:23 va60j kernel: Freeing initrd memory: 364k freed
Sep  3 19:39:17 va60j portmap: portmap startup succeeded 
Sep  3 19:39:23 va60j kernel: VFS: Mounted root (ext2 filesystem).
Sep  3 19:39:23 va60j random: Initializing random number generator:  succeeded
Sep  3 19:39:23 va60j cardmgr[970]: watching 2 sockets
Sep  3 19:39:23 va60j cardmgr[970]: unsupported card in socket 0

Sep  3 19:39:23 va60j cardmgr[970]:   product info: "Allied Telesis K.K.", "LA100-PCM V2"
Sep  3 19:39:23 va60j kernel: usb-uhci.c: High bandwidth mode enabled
Sep  3 19:39:23 va60j cardmgr[970]:   manfid: 0xc00f, 0x0001  function: 6 (network)
Sep  3 19:39:23 va60j kernel: PCI: Found IRQ 10 for device 00:07.2
Sep  3 19:39:23 va60j cardmgr[970]: socket 1: corega_K.K. Wireless_LAN_PCCB-11
Sep  3 19:39:23 va60j netfs: Mounting other filesystems:  succeeded
Sep  3 19:39:23 va60j kernel: usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 10
Sep  3 19:39:24 va60j cardmgr[970]: executing: 'modprobe wvlan_cs eth=0'
Sep  3 19:39:24 va60j kernel: usb-uhci.c: Detected 2 ports
Sep  3 19:39:24 va60j kernel: usb.c: new USB bus registered, assigned bus number 1
Sep  3 19:39:24 va60j cardmgr[970]: + Warning: loading /lib/modules/2.4.18-10k/kernel/drivers/net/pcmcia/wvlan_cs.o will taint the kernel: no license
Sep  3 19:39:24 va60j cardmgr[970]: executing: './network start wvlan0'

$B>JN,(B
Sep  3 19:39:34 va60j kernel: Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.6.29
Sep  3 19:39:34 va60j kernel: Copyright (c) 2001 Intel Corporation
Sep  3 19:39:34 va60j kernel: PCI: Found IRQ 10 for device 00:06.0
Sep  3 19:39:34 va60j kernel: PCI: Sharing IRQ 10 with 00:03.0
Sep  3 19:39:34 va60j kernel: 
Sep  3 19:39:34 va60j kernel: eth0: Intel(R) 8255x-based Ethernet Adapter
Sep  3 19:39:34 va60j kernel:   Mem:0xfebff000  IRQ:10  Speed:0 Mbps  Dx:N/A
Sep  3 19:39:34 va60j kernel:   Failed to detect cable link.
Sep  3 19:39:34 va60j kernel:   Speed and duplex will be determined at time of connection.
Sep  3 19:39:34 va60j kernel: Linux Kernel Card Services 3.1.22
Sep  3 19:39:34 va60j kernel:   options:  [pci] [cardbus] [pm]
Sep  3 19:39:34 va60j kernel: PCI: Found IRQ 5 for device 00:03.1
Sep  3 19:39:34 va60j kernel: PCI: Sharing IRQ 5 with 00:00.2
Sep  3 19:39:35 va60j kernel: PCI: Sharing IRQ 5 with 00:04.0
Sep  3 19:39:35 va60j kernel: PCI: Found IRQ 10 for device 00:03.0
Sep  3 19:39:35 va60j kernel: PCI: Sharing IRQ 10 with 00:06.0
Sep  3 19:39:35 va60j kernel: Yenta IRQ list 0a98, PCI irq5
Sep  3 19:39:35 va60j kernel: Socket status: 30000010
Sep  3 19:39:35 va60j kernel: Yenta IRQ list 0a98, PCI irq10
Sep  3 19:39:35 va60j kernel: Socket status: 30000010
Sep  3 19:39:35 va60j kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Sep  3 19:39:35 va60j xinetd[1346]: Unknown user: guest [line=8]
Sep  3 19:39:35 va60j kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x400
-0x44f 0x4d0-0x4d7
Sep  3 19:39:35 va60j kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Sep  3 19:39:35 va60j kernel: wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.6
Sep  3 19:39:35 va60j kernel: wvlan_cs: (c) Andreas Neuhaus <andy _at_ fasta.fh-dortmund.de>
Sep  3 19:39:35 va60j kernel: wvlan_cs: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
Sep  3 19:39:35 va60j kernel: wvlan_cs: Registered netdevice wvlan0
Sep  3 19:39:35 va60j kernel: wvlan_cs: MAC address on wvlan0 is 00 90 99 81 69 bd 
Sep  3 19:39:35 va60j kernel: wvlan_cs: This is a PrismII card, not a Wavelan IEEE card :-(
Sep  3 19:39:35 va60j kernel: You may want report firmare revision (0x8) and what the card support.
Sep  3 19:39:35 va60j kernel: I will try to make it work, but you should look for a better driver.
Sep  3 19:39:35 va60j kernel: wvlan_cs: Found firmware 0x8 (vendor 3) - Firmware capabilities : 1-0-0-0-1
Sep  3 19:39:35 va60j kernel: wvlan_cs: MAC address on wvlan0 is 00 90 99 81 69 bd 
Sep  3 19:39:35 va60j kernel: wvlan_cs: This is a PrismII card, not a Wavelan IEEE card :-(
Sep  3 19:39:35 va60j kernel: You may want report firmare revision (0x8) and what the card support.
Sep  3 19:39:35 va60j kernel: I will try to make it work, but you should look for a better driver.
Sep  3 19:39:35 va60j kernel: wvlan_cs: Found firmware 0x8 (vendor 3) - Firmware capabilities : 1-0-0-0-1

$B>JN,(B

Sep  3 19:40:22 va60j kernel: PCI: Found IRQ 5 for device 00:04.0
Sep  3 19:40:22 va60j kernel: PCI: Sharing IRQ 5 with 00:00.2
Sep  3 19:40:22 va60j kernel: PCI: Sharing IRQ 5 with 00:03.1
Sep  3 19:40:22 va60j kernel: maestro3: Configuring ESS Allegro found at IO 0xE400 IRQ 5
Sep  3 19:40:22 va60j kernel: maestro3:  subvendor id: 0x80f11033
Sep  3 19:40:23 va60j kernel: ac97_codec: AC97 Audio codec, id: 0x4583:0x8308 (ESS Allegro
 ES1988)
Sep  3 19:40:23 va60j modprobe: modprobe: Can't locate module sound-service-0-3
Sep  3 19:40:28 va60j gnome-name-server[1966]: starting
Sep  3 19:40:28 va60j gnome-name-server[1966]: name server starting
Sep  3 19:40:30 va60j gconfd (root-1968): starting (version 1.0.6), pid 1968 user 'root'
Sep  3 19:40:37 va60j kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Sep  3 19:40:37 va60j kernel: usb-uhci.c: interrupt, status 3, frame# 579
Sep  3 19:40:37 va60j kernel: sr0: scsi-1 drive
Sep  3 19:40:37 va60j kernel: Uniform CD-ROM driver Revision: 3.12
Sep  3 19:40:46 va60j xinetd[1991]: warning: can't get client address: Transport endpoint 
is not connected
Sep  3 19:42:18 va60j kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex
Sep  3 19:44:57 va60j login(pam_unix)[3186]: session opened for user nagasi by (uid=0)


$B!}(Bconfig$B4XO"(B
[root _at_ va60j /]# 
[root _at_ va60j /]# cd /etc
[root _at_ va60j /]# cat /etc/pcmcia/config
#
# PCMCIA Card Configuration Database
#
# config 1.154 2001/01/05 00:03:17 (David Hinds)
#

# config.opts is now included at the very end

#
# Device driver definitions
#

device "wvlan_cs"
  class "network" module "wvlan_cs"

device "epic100"
  class "network" module "cb_enabler", "epic100"

device "eepro100"
  class "network" module "cb_enabler", "eepro100"


#
# Ethernet adapter definitions
#

#$B$3$l$O%3%a%s%H2=$7$?J}$,$h$$$N$+ITL@(B
card "Allied Telesis LA-PCM Ethernet"
  manfid 0xc00f, 0x0002
  cis "cis/LA-PCM.dat"
  bind "pcnet_cs"


#nagasi$B!J%3%l%,$N(BPCCB-11$B$N6%9g$9$k$N$G%3%a%s%H2=!K(B
#card "CentreCOM LA-PCM V2 Ethernet"
# version "Allied Telesis, K.K.", "CentreCOM LA-PCM_V2"
# bind "pcnet_cs"

#
# 10/100baseT network adapters
#

#$B;HMQ$7$?$$%+!<%I$O$3$l!*(B
card "Allied Telesis CentreCOM LA100-PCM-T V2"
  version "Allied Telesis, K.K.",
    "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card"
  bind "pcnet_cs"

#
# Wireless network adapters
#
card "corega_K.K. Wireless_LAN_PCCB-11"
version "corega_K.K.", "Wireless_LAN_PCCB-11", "Version 01.02",""
 bind "wvlan_cs"


# Include configuration files for add-on drivers

source ./*.conf

# Include local configuration settings

source ./config.opts


[root _at_ va60j pcmcia]# cat config.opts
#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------

# System resources available for PCMCIA devices
include port 0x100-0x4ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff

# High port numbers do not always work...
# include port 0x1000-0x17ff

# Extra port range for IBM Token Ring
#include port 0xa00-0xaff

# Resources we should not use, even if they appear to be available

# First built-in serial port
#exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
#exclude irq 7
# PS/2 Mouse controller port, comment this out if you don't have a PS/2
# based mouse
exclude irq 12

#----------------------------------------------------------------------

# Examples of options for loadable modules
# Options for Raylink/WebGear driver: uncomment only one line...
# Generic ad-hoc network
module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1"
# Infrastructure network for older cards
#module "ray_cs" opts "net_type=1 essid=ESSID1"
# Infrastructure network for WebGear
#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256"
# Options for WaveLAN/IEEE driver (AccessPoint mode)...
#module "wvlan_cs" opts "station_name=MY_PC"
# Options for WaveLAN/IEEE driver (ad-hoc mode)...
#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"

module "wvlan_cs" opts "eth=0"


[root _at_ va60j pcmcia]# cat wireless.opts
# Wireless LAN adapter configuration

case "$ADDRESS" in

# Activate with "cardctl scheme essidany"
# Generic example (decribe all possible settings)
*,*,*,*)
#    INFO="Fill with your own settings..."
	INFO="NAGA SETTING"
# ESSID (extended network name) : My Network, any
#     ESSID=""
   	 ESSID="09FBCA"
# NWID/Domain (cell identifier) : 89AB, 100, off
     	 NWID=""
# Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
#     MODE=""
    	 MODE="Managed"
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
 	 FREQ=""
         CHANNEL="1"
# Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm)
         SENS=""
# Bit rate : auto, 1M, 11M
         RATE="11M"
# Encryption key : 4567-89AB-CD, s:password
#    KEY="12345ABCDE"

# RTS threshold : off, 500
   	 RTS=""
# Fragmentation threshold : off, 1000
         FRAG=""
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
         IWCONFIG=""
# iwspy parameters : + 01:23:45:67:89:AB
         IWSPY=""
# iwpriv parameters : set_port 2, set_histo 50 60
         IWPRIV=""
    ;;
esac

[root _at_ va60j sysconfig]# cat pcmcia
PCMCIA=yes
PCIC=yenta_socket
PCIC_OPTS=
CORE_OPTS=

[root _at_ va60j etc]# cat modules.conf
alias eth0 e100
alias parport_lowlevel parport_pc
alias sound-slot-0 maestro3
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias usb-controller usb-uhci

[root _at_ va60j etc]# 
[root _at_ va60j etc]# 
[root _at_ va60j etc]# 
[root _at_ va60j etc]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:00:4C:2E:5D:C9  
          inet addr:192.168.0.7  Bcast:192.168.0.63  Mask:255.255.255.192
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1209 errors:0 dropped:0 overruns:0 frame:0
          TX packets:971 errors:3 dropped:0 overruns:0 carrier:3
          collisions:0 txqueuelen:100 
          RX bytes:99705 (97.3 Kb)  TX bytes:545338 (532.5 Kb)
          Interrupt:10 Base address:0xef00 Memory:febff000-febff038 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:262 errors:0 dropped:0 overruns:0 frame:0
          TX packets:262 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:19366 (18.9 Kb)  TX bytes:19366 (18.9 Kb)

wvlan0    Link encap:Ethernet  HWaddr 00:90:99:81:69:BD  
          inet addr:192.168.1.7  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:463 errors:0 dropped:0 overruns:0 frame:0
          TX packets:525 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:394557 (385.3 Kb)  TX bytes:81792 (79.8 Kb)
          Interrupt:3 Base address:0x100 




-- 
Nobuyoshi Nagashima <nagasi _at_ msb.biglobe.ne.jp>