[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 12/13] serial_tx3912: remove cli()/sti() in drivers/char/serial_tx3912.c
Signed-off-by: James Nelson <james4765@xxxxxxxxx>
diff -urN --exclude='*~' linux-2.6.11-rc1-mm1-original/drivers/char/serial_tx3912.c linux-2.6.11-rc1-mm1/drivers/char/serial_tx3912.c
--- linux-2.6.11-rc1-mm1-original/drivers/char/serial_tx3912.c 2004-12-24 16:34:57.000000000 -0500
+++ linux-2.6.11-rc1-mm1/drivers/char/serial_tx3912.c 2005-01-16 07:32:19.514527630 -0500
@@ -222,7 +222,7 @@
unsigned long flags;
unsigned long ints;
- save_and_cli(flags);
+ local_irq_save(flags);
port = (struct rs_port *)dev_id;
rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "rs_interrupt (port %p, shift %d)...", port, intshift);
@@ -241,10 +241,8 @@
INTTYPE(UART_PARITYERR_INT) |
INTTYPE(UART_RX_INT)) << intshift);
- if (!port || !port->gs.tty) {
- restore_flags(flags);
- return;
- }
+ if (!port || !port->gs.tty)
+ goto out;
/* RX Receiver Holding Register Overrun */
if (ints & INTTYPE(UART_RXOVERRUN_INT)) {
@@ -275,7 +273,7 @@
receive_char_pio(port);
}
- restore_flags(flags);
+out: local_irq_restore(flags);
rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "end.\n");
}
@@ -288,7 +286,7 @@
unsigned long flags;
unsigned long ints;
- save_and_cli(flags);
+ local_irq_save(flags);
port = (struct rs_port *)dev_id;
rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "rs_interrupt (port %p, shift %d)...", port, intshift);
@@ -296,10 +294,8 @@
/* Get the interrrupts we have enabled */
int2status = IntStatus2 & IntEnable2;
- if (!port || !port->gs.tty) {
- restore_flags(flags);
- return;
- }
+ if (!port || !port->gs.tty)
+ goto out;
/* Get interrupts in easy to use form */
ints = int2status >> intshift;
@@ -324,7 +320,7 @@
check_modem_status();
*/
- restore_flags(flags);
+out: local_irq_restore(flags);
rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "end.\n");
}
@@ -352,7 +348,7 @@
struct rs_port *port = ptr;
unsigned long flags;
- save_and_cli(flags);
+ local_irq_save(flags);
port->gs.flags &= ~GS_TX_INTEN;
IntEnable2 &= ~((INTTYPE(UART_TX_INT) |
@@ -363,7 +359,7 @@
INTTYPE(UART_EMPTY_INT) |
INTTYPE(UART_TXOVERRUN_INT)) << port->intshift;
- restore_flags(flags);
+ local_irq_restore(flags);
}
static void rs_enable_tx_interrupts (void * ptr)
@@ -371,7 +367,7 @@
struct rs_port *port = ptr;
unsigned long flags;
- save_and_cli(flags);
+ local_irq_save(flags);
IntClear2 = (INTTYPE(UART_TX_INT) |
INTTYPE(UART_EMPTY_INT) |
@@ -384,7 +380,7 @@
/* Send a char to start TX interrupts happening */
transmit_char_pio(port);
- restore_flags(flags);
+ local_irq_restore(flags);
}
static void rs_disable_rx_interrupts (void * ptr)
@@ -392,7 +388,7 @@
struct rs_port *port = ptr;
unsigned long flags;
- save_and_cli(flags);
+ local_irq_save(flags);
IntEnable2 &= ~((INTTYPE(UART_RX_INT) |
INTTYPE(UART_RXOVERRUN_INT) |
@@ -406,7 +402,7 @@
INTTYPE(UART_BREAK_INT) |
INTTYPE(UART_PARITYERR_INT)) << port->intshift;
- restore_flags(flags);
+ local_irq_restore(flags);
}
static void rs_enable_rx_interrupts (void * ptr)
@@ -414,7 +410,7 @@
struct rs_port *port = ptr;
unsigned long flags;
- save_and_cli(flags);
+ local_irq_save(flags);
IntEnable2 |= (INTTYPE(UART_RX_INT) |
INTTYPE(UART_RXOVERRUN_INT) |
@@ -433,7 +429,7 @@
INTTYPE(UART_BREAK_INT) |
INTTYPE(UART_PARITYERR_INT)) << port->intshift;
- restore_flags(flags);
+ local_irq_restore(flags);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
References: