Re: 2.6.2-rc3-mm1

[Alistair John Strachan <s0348365 _at_ xxxxxxxxxxxx>]

On Wednesday 04 February 2004 01:43, Derek Foreman wrote:
> On Tue, 3 Feb 2004, Alistair John Strachan wrote:
> > On Tuesday 03 February 2004 18:32, Bartlomiej Zolnierkiewicz wrote:
> > > On Tuesday 03 of February 2004 18:39, Alistair John Strachan wrote:
[snip]
> > > > UDMA(133) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
> > > > hde: max request size: 128KiB
> > > >
> > > > 30 seconds later, I get something like:
> > > >
> > > > hde: lost interrupt
> > > > hde: lost interrupt
>
> Just a quick check to make sure this isn't the same ACPI problem I'm
> seeing here with an Nforce2 board and recent kernels...
>
> Does the "acpi=off" boot parameter make things work?

Thanks, this was it. I should've tried this first. Bart, the driver comes up 
just fine with acpi disabled in the most recent kernels.

ACPI is clearly broken on nForce 2, though, and booting my system with 
acpi=off, although allowing me to get to init, breaks USB initialisation. 
This breakage must have been introduced since 2.6.2-rc1-mm1.

-- 
Cheers,
Alistair.

personal:   alistair()devzero!co!uk
university: s0348365()sms!ed!ac!uk
student:    CS/AI Undergraduate
contact:    7/10 Darroch Court,
            University of Edinburgh.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo _at_ vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/