Re: 2.6.2-rc3-mm1

[Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz _at_ xxxxxxxxxxxxxx>]

On Wednesday 04 of February 2004 01:17, Alistair John Strachan wrote:
> On Wednesday 04 February 2004 00:00, Bartlomiej Zolnierkiewicz wrote:
> [snip]
>
> > > > > UDMA(133) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
> > > > > hde: max request size: 128KiB
> > > > >
> > > > > 30 seconds later, I get something like:
> > > > >
> > > > > hde: lost interrupt
> > > > > hde: lost interrupt
> > > >
> > > > It seems kernel hangs in ide-disk.c,
> > > > idedisk_setup()->write_cache()->...
> > > >
> > > > > The kernel does not recover. Presumably it is a problem specific to
> > > > > my PDC IDE controller.
> > > >
> > > > Do you run with Promise BIOS disabled?  If so please try booting
> > > > kernel with "hde=autotune hdg=autotune" parameters.  If still no-go,
> > > > try this patch:
> > >
> > > Neither suggestion changes the behaviour. I've got the BIOS enabled,
> > > but in the past it's made no difference. I still see lost interrupts.
> >
> > Please try this debugging patch to see it hangs on
> > idedisk_setup()->write_cache().
> >
> > --- linux/drivers/ide/ide-disk.c	2004-02-04 00:57:49.000000000 +0100
> > +++ linux-2.6.2-rc3-bk3/drivers/ide/ide-disk.c	2004-02-04
> > 00:58:58.571025744 +0100 @@ -1668,8 +1668,10 @@
> >  #endif	/* CONFIG_IDEDISK_MULTI_MODE */
> >  	}
> >  	drive->no_io_32bit = id->dword_io ? 1 : 0;
> > +	printk(KERN_INFO "%s: before write_cache()\n", drive->name);
> >  	if (drive->id->cfs_enable_2 & 0x3000)
> >  		write_cache(drive, (id->cfs_enable_2 & 0x3000));
> > +	printk(KERN_INFO "%s: after write_cache()\n", drive->name);
> >
> >  #ifdef CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
> >  	if (drive->using_dma)
>
> Tried the patch. I see both before and after messages for hda, but when hde
> is probed I see neither. Briefly looking at the IDE code, I see the max
> request size: printk comes before either of those lines, as as nothing else
> is printed after that line (see original bug report), I can only assume the
> problem is somewhere before the write_cache().

Oh yes, I am stupid^Wtired.  Maybe it is init_idedisk_capacity()?.
Can you add some more printks to idedisk_setup() to see where it hangs?

> I applied the patch on top of your previous changes, as they seemed
> innocuous enough.

OK.

--bart

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo _at_ vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/