People ask how to write the CIS on a SmartMedia card
using an sddr09 reader/writer. The patch below documents
the required command (but does not add the code).
Two years ago or so I used this to fix the CIS on a card
that my camera no longer wanted to accept. A Linux utility
to do this might be useful, but the problem always is that
we do not really have a good mechanism.
How does one tell a driver that it has to do something special?
Add yet another ioctl?
Andries
--- /linux/2.6/linux-2.6.1/linux/drivers/usb/storage/sddr09.c 2004-01-11 14:20:50.000000000 +0100
+++ sddr09.c 2004-01-25 11:26:19.000000000 +0100
@@ -27,6 +27,20 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/*
+ * Known vendor commands: 12 bytes, first byte is opcode
+ *
+ * E7: read scatter gather
+ * E8: read
+ * E9: write
+ * EA: erase
+ * EB: reset
+ * EC: read status
+ * ED: read ID
+ * EE: write CIS (?)
+ * EF: compute checksum (?)
+ */
+
#include "transport.h"
#include "protocol.h"
#include "usb.h"
@@ -461,6 +475,7 @@
*
* Always precisely one block is erased; bytes 2-5 and 10-11 are ignored.
* The byte address being erased is 2*Eaddress.
+ * The CIS cannot be erased.
*/
static int
sddr09_erase(struct us_data *us, unsigned long Eaddress) {
@@ -487,6 +502,20 @@
}
/*
+ * Write CIS Command: 12 bytes.
+ * byte 0: opcode: EE
+ * bytes 2-5: write address in shorts
+ * bytes 10-11: sector count
+ *
+ * This writes at the indicated address. Don't know how it differs
+ * from E9. Maybe it does not erase? However, it will also write to
+ * the CIS.
+ *
+ * When two such commands on the same page follow each other directly,
+ * the second one is not done.
+ */
+
+/*
* Write Command: 12 bytes.
* byte 0: opcode: E9
* bytes 2-5: write address (big-endian, counting shorts, sector aligned).
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo _at_ vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/