Re: PPC KGDB changes and some help?

[Tom Rini <trini _at_ xxxxxxxxxxxxxxxxxxx>]

On Wed, Jan 21, 2004 at 12:21:28PM -0700, Tom Rini wrote:
> On Wed, Jan 21, 2004 at 11:42:17AM -0700, Tom Rini wrote:
> > On Wed, Jan 21, 2004 at 10:23:12PM +0530, Amit S. Kale wrote:
> > 
> > > Hi,
> > > 
> > > Here it is: ppc kgdb from timesys kernel is available at
> > > http://kgdb.sourceforge.net/kgdb-2/linux-2.6.1-kgdb-2.1.0.tar.bz2
> > > 
> > > This is my attempt at extracting kgdb from TimeSys kernel. It works well in 
> > > TimeSys kernel, so blame me if above patch doesn't work.
> > 
> > Okay, here's my first patch against this.
> 
> And dependant upon this is a patch to fixup the rest of the common PPC
> code, as follows:

And on top of all of that is the following, which allows KGDB to work on
the Motorola LoPEC.

--- 1.48/arch/ppc/Kconfig	Wed Jan 21 10:13:13 2004
+++ edited/arch/ppc/Kconfig	Wed Jan 21 10:33:55 2004
@@ -583,11 +583,6 @@
 	depends on PPC_MULTIPLATFORM
 	default y
 
-config PPC_GEN550
-	bool
-	depends on SANDPOINT
-	default y
-
 config PPC_PMAC
 	bool
 	depends on PPC_MULTIPLATFORM
@@ -603,6 +598,11 @@
 	depends on PPC_PMAC || PPC_CHRP
 	default y
 
+config PPC_GEN550
+	bool
+	depends on SANDPOINT || MCPN765 || LOPEC
+	default y
+
 config FORCE
 	bool
 	depends on 6xx && (PCORE || POWERPMC250)
--- 1.20/arch/ppc/platforms/lopec_setup.c	Fri Sep 12 09:26:53 2003
+++ edited/arch/ppc/platforms/lopec_setup.c	Wed Jan 21 10:32:15 2004
@@ -32,6 +32,7 @@
 #include <asm/mpc10x.h>
 #include <asm/hw_irq.h>
 #include <asm/prep_nvram.h>
+#include <asm/kgdb.h>
 
 extern char saved_command_line[];
 extern void lopec_find_bridges(void);
@@ -261,44 +262,6 @@
 		: "=r" (batu), "=r" (batl));
 }
 
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <asm/serial.h>
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* Defined in <asm/serial.h> */
-};
-
-volatile unsigned char *com_port;
-volatile unsigned char *com_port_lsr;
-
-static void
-serial_writechar(char c)
-{
-	while ((*com_port_lsr & UART_LSR_THRE) == 0)
-		;
-	*com_port = c;
-}
-
-void
-lopec_progress(char *s, unsigned short hex)
-{
-	volatile char c;
-
-	com_port = (volatile unsigned char *) rs_table[0].port;
-	com_port_lsr = com_port + UART_LSR;
-
-	while ((c = *s++) != 0)
-		serial_writechar(c);
-
-	/* Most messages don't have a newline in them */
-	serial_writechar('\n');
-	serial_writechar('\r');
-}
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-
 TODC_ALLOC();
 
 static void __init
@@ -383,7 +346,10 @@
 	ppc_ide_md.default_io_base = lopec_ide_default_io_base;
 	ppc_ide_md.ide_init_hwif = lopec_ide_init_hwif_ports;
 #endif
+#ifdef CONFIG_KGDB
+	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
+#endif
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = lopec_progress;
+	ppc_md.progress = gen550_progress;
 #endif
 }

-- 
Tom Rini
http://gate.crashing.org/~trini/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo _at_ vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/