Hello,
As you can see, it's a heavily patched kernel running on the following
hardware:
P4, 2GB of RAM, 2x80GB SATA drives on the ICH5R chipset SATA controller:
$ lspci
00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
02:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
02:0a.0 Ethernet controller: Intel Corp.: Unknown device 1013
02:0b.0 Ethernet controller: Intel Corp.: Unknown device 1013
The software config is in short:
softraid (all partitions, including /),sata,hipac packet filter,xfs on all
partitions except / which has ext3.
The oops happens shortly after booting the machine and results in
broken raid (up to the point no raid partition mounts except for /) and,
once, in slightly messed up data on /. The oops is as follows:
-------
ksymoops 2.4.9 on i686 2.4.24-xfs-gr2-sata-hipac-p4-up. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.24-xfs-gr2-sata-hipac-p4-up/ (default)
-m /boot/System.map-2.4.24-xfs-gr2-sata-hipac-p4-up (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Unable to handle kernel paging request at virtual address a6069a94
c01c5010
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c01c5010>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: f7153800 ebx: f352c000 ecx: 00000079 edx: a6069a80
esi: fffffff7 edi: 00000002 ebp: 59bfec1c esp: f352df94
ds: 0018 es: 0018 ss: 0018
Process mysqld (pid: 3725, stackpage=f352d000)
Stack: c01c3e85 00000003 00000022 ffffffff 00000000 f352c000 00000006 f352c000
59bfec04 00000002 59bfec1c c01935d3 00000079 00000000 00000000 59bfec04
00000002 59bfec1c 0000008c 0000002b 0000002b 0000008c 25739315 00000023
Call Trace: [<c01c3e85>] [<c01935d3>]
Code: ff 42 14 89 d0 c3 8d 76 00 8d bc 27 00 00 00 00 8b 4c 24 04
>>EIP; c01c5010 <fget+20/30> <=====
>>eax; f7153800 <_end+36d73bf8/384b6458>
>>ebx; f352c000 <_end+3314c3f8/384b6458>
>>esp; f352df94 <_end+3314e38c/384b6458>
Trace; c01c3e85 <sys_llseek+15/c0>
Trace; c01935d3 <system_call+33/40>
Code; c01c5010 <fget+20/30>
00000000 <_EIP>:
Code; c01c5010 <fget+20/30> <=====
0: ff 42 14 incl 0x14(%edx) <=====
Code; c01c5013 <fget+23/30>
3: 89 d0 mov %edx,%eax
Code; c01c5015 <fget+25/30>
5: c3 ret
Code; c01c5016 <fget+26/30>
6: 8d 76 00 lea 0x0(%esi),%esi
Code; c01c5019 <fget+29/30>
9: 8d bc 27 00 00 00 00 lea 0x0(%edi,1),%edi
Code; c01c5020 <put_filp+0/40>
10: 8b 4c 24 04 mov 0x4(%esp,1),%ecx
<1>Unable to handle kernel paging request at virtual address 0002e476
c01c35c7
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01c35c7>] Not tainted
EFLAGS: 00010282
eax: f7153800 ebx: 0002e462 ecx: 00000003 edx: 0002e462
esi: f7169980 edi: f7169980 ebp: 00000004 esp: f7057e80
ds: 0018 es: 0018 ss: 0018
Process mysqld (pid: 625, stackpage=f7057000)
Stack: f5e95900 f7169980 000000ff 00000078 f7169980 c01a3574 0002e462 f7169980
f7aa2c80 00000000 f7056000 00000009 c01a3c77 f7169980 00000009 f7056000
00000000 f7057f08 00000009 c01aa18c 00000009 c01aa365 00000009 00000009
Call Trace: [<c01a3574>] [<c01a3c77>] [<c01aa18c>] [<c01aa365>] [<c019330a>]
[<c01d426c>] [<c01d4070>] [<c030c784>] [<c0191d06>] [<c019d925>] [<c01a464d>]
[<c0192506>] [<c01935d3>]
Code: 8b 43 14 85 c0 74 52 8b 43 10 31 ff 85 c0 74 07 8b 50 24 85
>>EIP; c01c35c7 <filp_close+17/80> <=====
>>eax; f7153800 <_end+36d73bf8/384b6458>
>>esi; f7169980 <_end+36d89d78/384b6458>
>>edi; f7169980 <_end+36d89d78/384b6458>
>>esp; f7057e80 <_end+36c78278/384b6458>
Trace; c01a3574 <put_files_struct+64/d0>
Trace; c01a3c77 <do_exit+b7/280>
Trace; c01aa18c <sig_exit+ac/b0>
Trace; c01aa365 <dequeue_signal+65/d0>
Trace; c019330a <do_signal+1ca/2c0>
Trace; c01d426c <sys_getdents64+ac/c0>
Trace; c01d4070 <filldir64+0/150>
Trace; c030c784 <netif_receive_skb+c4/190>
Trace; c0191d06 <__switch_to+26/d0>
Trace; c019d925 <schedule+215/350>
Trace; c01a464d <do_setitimer+ed/110>
Trace; c0192506 <sys_rt_sigsuspend+c6/e0>
Trace; c01935d3 <system_call+33/40>
Code; c01c35c7 <filp_close+17/80>
00000000 <_EIP>:
Code; c01c35c7 <filp_close+17/80> <=====
0: 8b 43 14 mov 0x14(%ebx),%eax <=====
Code; c01c35ca <filp_close+1a/80>
3: 85 c0 test %eax,%eax
Code; c01c35cc <filp_close+1c/80>
5: 74 52 je 59 <_EIP+0x59>
Code; c01c35ce <filp_close+1e/80>
7: 8b 43 10 mov 0x10(%ebx),%eax
Code; c01c35d1 <filp_close+21/80>
a: 31 ff xor %edi,%edi
Code; c01c35d3 <filp_close+23/80>
c: 85 c0 test %eax,%eax
Code; c01c35d5 <filp_close+25/80>
e: 74 07 je 17 <_EIP+0x17>
Code; c01c35d7 <filp_close+27/80>
10: 8b 50 24 mov 0x24(%eax),%edx
Code; c01c35da <filp_close+2a/80>
13: 85 00 test %eax,(%eax)
1 warning issued. Results may not be reliable.
------
In all cases, the oops is preceeded by the following line in the logs:
get_unused_fd: slot 120 not NULL!
The patches I used were:
xfs-2.4.23-split*
nf-hipac-0.8rev3
2.4.24-pre2-libata1
grsecurity-2.0-rc4-2.4.23
The full kernel config is attached.
If you need more detailed information, please let me know.
TIA,
marek
# # Automatically generated make config: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_HIGHIO is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_PM is not set # CONFIG_APM is not set # # ACPI Support # # CONFIG_ACPI is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_CISS_MONITOR_THREAD is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_STATS is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y CONFIG_MD_MULTIPATH=y # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_FTP=y # CONFIG_IP_NF_AMANDA is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_IRC is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_MAC=y # CONFIG_IP_NF_MATCH_PKTTYPE is not set CONFIG_IP_NF_MATCH_MARK=y # CONFIG_IP_NF_MATCH_MULTIPORT is not set CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_RECENT=y # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_DSCP is not set # CONFIG_IP_NF_MATCH_AH_ESP is not set CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y # CONFIG_IP_NF_MATCH_TCPMSS is not set # CONFIG_IP_NF_MATCH_STEALTH is not set CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_UNCLEAN=y CONFIG_IP_NF_MATCH_OWNER=y # CONFIG_IP_NF_FILTER is not set # CONFIG_IP_NF_NAT is not set CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y # CONFIG_IP_NF_TARGET_ECN is not set # CONFIG_IP_NF_TARGET_DSCP is not set CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_LOG=y # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_TARGET_TCPMSS is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m # CONFIG_IP_NF_ARP_MANGLE is not set # # IP: NF-HIPAC Configuration # CONFIG_IP_NF_HIPAC=m CONFIG_IP_NF_HIPAC_CTHELP=m # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_BLK_DEV_ADMA100 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # CONFIG_BLK_DEV_ATARAID_SII is not set # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_PROBE_EISA_VL is not set # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # # Input core support is needed for gameports # # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_KCS is not set # CONFIG_IPMI_WATCHDOG is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_SCx200_GPIO is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_HW_RANDOM is not set # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # # Direct Rendering Manager (XFree86 DRI support) # # CONFIG_DRM is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_QFMT_V2 is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y # CONFIG_ISO9660_FS is not set # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set CONFIG_XFS_FS=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_TRACE is not set # CONFIG_XFS_DEBUG is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_NFS_FS is not set # CONFIG_NFS_V3 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_ROOT_NFS is not set # CONFIG_NFSD is not set # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set # CONFIG_SUNRPC is not set # CONFIG_LOCKD is not set # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_SMB_NLS is not set # CONFIG_NLS is not set # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set # # Support for USB gadgets # # CONFIG_USB_GADGET is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=0 # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_TEST is not set # # Library routines # # CONFIG_CRC32 is not set # CONFIG_ZLIB_INFLATE is not set # CONFIG_ZLIB_DEFLATE is not set # # Grsecurity # CONFIG_GRKERNSEC=y CONFIG_CRYPTO=y CONFIG_CRYPTO_SHA256=y # CONFIG_GRKERNSEC_LOW is not set # CONFIG_GRKERNSEC_MID is not set # CONFIG_GRKERNSEC_HI is not set CONFIG_GRKERNSEC_CUSTOM=y # # Address Space Protection # CONFIG_GRKERNSEC_PAX_NOEXEC=y # CONFIG_GRKERNSEC_PAX_PAGEEXEC is not set CONFIG_GRKERNSEC_PAX_SEGMEXEC=y # CONFIG_GRKERNSEC_PAX_EMUTRAMP is not set CONFIG_GRKERNSEC_PAX_MPROTECT=y CONFIG_GRKERNSEC_PAX_NOELFRELOCS=y CONFIG_GRKERNSEC_PAX_ASLR=y # CONFIG_GRKERNSEC_PAX_RANDKSTACK is not set CONFIG_GRKERNSEC_PAX_RANDUSTACK=y CONFIG_GRKERNSEC_PAX_RANDMMAP=y # CONFIG_GRKERNSEC_PAX_RANDEXEC is not set CONFIG_GRKERNSEC_KMEM=y CONFIG_GRKERNSEC_IO=y CONFIG_RTC=y # CONFIG_GRKERNSEC_PROC_MEMMAP is not set # CONFIG_GRKERNSEC_HIDESYM is not set # # Role Based Access Control Options # CONFIG_GRKERNSEC_ACL_HIDEKERN=y CONFIG_GRKERNSEC_ACL_MAXTRIES=3 CONFIG_GRKERNSEC_ACL_TIMEOUT=30 # # Filesystem Protections # CONFIG_GRKERNSEC_PROC=y # CONFIG_GRKERNSEC_PROC_USER is not set CONFIG_GRKERNSEC_PROC_USERGROUP=y CONFIG_GRKERNSEC_PROC_GID=4 CONFIG_GRKERNSEC_PROC_ADD=y CONFIG_GRKERNSEC_LINK=y CONFIG_GRKERNSEC_FIFO=y CONFIG_GRKERNSEC_CHROOT=y CONFIG_GRKERNSEC_CHROOT_MOUNT=y CONFIG_GRKERNSEC_CHROOT_DOUBLE=y CONFIG_GRKERNSEC_CHROOT_PIVOT=y CONFIG_GRKERNSEC_CHROOT_CHDIR=y CONFIG_GRKERNSEC_CHROOT_CHMOD=y CONFIG_GRKERNSEC_CHROOT_FCHDIR=y CONFIG_GRKERNSEC_CHROOT_MKNOD=y CONFIG_GRKERNSEC_CHROOT_SHMAT=y CONFIG_GRKERNSEC_CHROOT_UNIX=y CONFIG_GRKERNSEC_CHROOT_FINDTASK=y CONFIG_GRKERNSEC_CHROOT_NICE=y CONFIG_GRKERNSEC_CHROOT_SYSCTL=y CONFIG_GRKERNSEC_CHROOT_CAPS=y # # Kernel Auditing # CONFIG_GRKERNSEC_AUDIT_GROUP=y CONFIG_GRKERNSEC_AUDIT_GID=100 # CONFIG_GRKERNSEC_EXECLOG is not set CONFIG_GRKERNSEC_RESLOG=y # CONFIG_GRKERNSEC_CHROOT_EXECLOG is not set # CONFIG_GRKERNSEC_AUDIT_CHDIR is not set CONFIG_GRKERNSEC_AUDIT_MOUNT=y CONFIG_GRKERNSEC_AUDIT_IPC=y # CONFIG_GRKERNSEC_SIGNAL is not set CONFIG_GRKERNSEC_FORKFAIL=y CONFIG_GRKERNSEC_TIME=y CONFIG_GRKERNSEC_PROC_IPADDR=y # # Executable Protections # CONFIG_GRKERNSEC_EXECVE=y CONFIG_GRKERNSEC_DMESG=y CONFIG_GRKERNSEC_RANDPID=y # CONFIG_GRKERNSEC_TPE is not set # # Network Protections # CONFIG_GRKERNSEC_RANDNET=y CONFIG_GRKERNSEC_RANDISN=y CONFIG_GRKERNSEC_RANDID=y CONFIG_GRKERNSEC_RANDSRC=y # CONFIG_GRKERNSEC_RANDRPC is not set CONFIG_GRKERNSEC_SOCKET=y # CONFIG_GRKERNSEC_SOCKET_ALL is not set # CONFIG_GRKERNSEC_SOCKET_CLIENT is not set CONFIG_GRKERNSEC_SOCKET_SERVER=y CONFIG_GRKERNSEC_SOCKET_SERVER_GID=100 # # Sysctl support # CONFIG_GRKERNSEC_SYSCTL=y # # Logging options # CONFIG_GRKERNSEC_FLOODTIME=10 CONFIG_GRKERNSEC_FLOODBURST=4
Attachment:
signature.asc
Description: Digital signature
- Prev by Date: Re: 2.6.1-mm4
- Next by Date: Re: PROBLEM: ACPI freezes 2.6.1 on boot
- Previous by thread: Re: [2.6 patch] show "Fusion MPT device support" menu only if BLK _DEV_SD
- Next by thread: [2.6.1-mm5] Unable to handle kernel paging request
- Indexes:[Main][Thread]