error message in dmesg

[Henti Smith <henti _at_ xxxxxxxxxxxxxx>]

Hi there 

I've upgraded to 2.6.0 and I get this error in dmesg: 

------------[ cut here ]------------
kernel BUG at mm/slab.c:1268!
invalid operand: 0000 [#1]
CPU:    0
EIP:    0060:[<c0138825>]    Tainted: PF 
EFLAGS: 00010202
EIP is at kmem_cache_create+0x3c5/0x4cc
eax: 0000002c   ebx: dfff3498   ecx: c04d30f8   edx: c3d52000
esi: c03d3b4d   edi: e0a42d44   ebp: c3d53f64   esp: c3d53f34
ds: 007b   es: 007b   ss: 0068
Process modprobe (pid: 4841, threadinfo=c3d52000 task=cb71ccc0)
Stack: c03aacc0 e0a42d3b 00002000 c3d53f54 dfe1d794 c0000000 dfe1d758 ffffff80 
       00000000 00000000 00000004 e0a52c80 c3d53fbc e0a5411d e0a42d3b 00000080 
       00000080 00002000 00000000 00000000 c040d3b0 c3d52000 e0a5400c c040d3b0 
Call Trace:
 [<e0a5411d>] scsi_init_queue+0x47/0xca [scsi_mod]
 [<e0a5400c>] init_scsi+0xc/0xd6 [scsi_mod]
 [<c0131063>] sys_init_module+0x135/0x27b
 [<c0109233>] syscall_call+0x7/0xb

Code: 0f 0b f4 04 d2 a4 3a c0 8b 0b e9 71 ff ff ff 8b 47 34 c7 04 

This seems to happen after I've used my USB drive, 16MB Kalliba/Intel labeled

hub 2-0:1.0: new USB device on port 2, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor:           Model:                   Rev:     
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 31263 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: Mode Sense: 00 0f 00 00
sda: assuming drive cache: write through
 /dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb 2-2: USB disconnect, address 2


system information can be found at http://www.geekware.co.za/henti/kernel

-- 
Henti Smith
henti _at_ geekware.co.za
Co-Owner
+27 82 958 2525
http://www.geekware.co.za
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo _at_ vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/