Re: any chance of 2.6.0-test*?

[Terje Eggestad <terje.eggestad _at_ xxxxxxxxx>]

On man, 2003-01-13 at 17:26, Jens Axboe wrote:
> On Mon, Jan 13 2003, Terje Eggestad wrote:
> > On man, 2003-01-13 at 16:49, Jens Axboe wrote:
> > > On Mon, Jan 13 2003, Terje Eggestad wrote:
> > > > Considering that doing kernel development is hard enough, new
> > > > development is almost always done on uni processors kernels that do only
> > > > one thing at the time. Then when you base logic is OK, you move to a
> > > > SMP, which means (adding and) debugging you spin locks.
> > > 
> > > Goto's aside, I find the above extremely bad advise. You should _always_
> > > develop with smp and for smp from the very start, or you will most
> > > likely not get it right later on. With preempt, this becomes even more
> > > important.
> > 
> > You should, and I do, *design* with smp in mind, and I throw in
> > smplock/unlonk as I go, but I tend to make first runs on a UP. 
> > 
> > I see your point on preemt, though.
> > You do first runs on SMP? 
> 
> Always, if for nothing else than the benefit of a better debugging
> environment.
> 
> > > > Considering that fucking up spin locks are prone to corrupting your
> > > > machine, one very simple trick to makeing fewer mistakes to to have one,
> > > > and only one, unlock for every lock. 
> > > 
> > > Taking a spin lock twice will hard lock the machine, however on smp you
> > > will typically have the luxury of an nmi watchdog which will help you
> > > solve this quickly. Double unlock will oops immediately if you run with
> > > spin lock debugging (you probably should, if you are developing kernel
> > > code).
> > 
> > I have the console on a serial port, and a terminal server. With kdb,
> > you can enter the kernel i kdb even when deadlocked.
> 
> Even if spinning with interrupt disabled?

Haven't painted myself into that corner yet. Doubt it, very much.
 
-- 
_________________________________________________________________________

Terje Eggestad                  mailto:terje.eggestad _at_ scali.no
Scali Scalable Linux Systems    http://www.scali.com

Olaf Helsets Vei 6              tel:    +47 22 62 89 61 (OFFICE)
P.O.Box 150, Oppsal                     +47 975 31 574  (MOBILE)
N-0619 Oslo                     fax:    +47 22 62 89 51
NORWAY            
_________________________________________________________________________

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo _at_ vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/